[Product Features]
• 2.5” standard form factor with SATA standard interface connector.
• Compliant with SATA revision 3.1 standard with 6.0 Gb/s transfer rate. 
• Compliant with ATA/ATAPI-8 standard and ACS-2 command protocol.
• Built-in-Voltage detector for power shielding FW protection.
• Native Command Queuing up to 32 commands
• Garbage collection and TRIM Data Set Management command
• Global wear leveling algorithm evens program/erase count
• Early weak block retirement - Supports SMART feature command set.
• Supports 28/48 bit LBA mode command
• Built-in temperature sensor (Thermal Throttling) function to adjust access speed of NAND flash and keep the SSD system stable.
• Standard IPC A-610E

[Product Specifications]
• Dimension: 3.95 x 2.75 x 0.26 inch
• Weight: 2.65 oz/ 0.17 lb
• Form Factor: 2.5 inch
• Interface: SATA 6.0Gb/s, backward compatible with 3.0Gb/s & 1.5Gb/s interface
• ECC Capability: Hardware LDPC ECC engine (120bit/1KB) and Block/Page RAID
• MTBF: >3,000,000 hrs @25°C (MIL-HDBK-217F part count method Telcordia SR-332 Method)
• Program / Erase Endurance: 3,000 P/E cycles
• Optimal sustained performance: Direct-To-TLC and SLC Cache Architecture
• Data Endurance & Data integrity: StaticDataRefresh technology, Early weak block retirement, Global Wear leveling
• Data Retention: ****
- 10% of program / Erase Endurance cycles: 10 Years
- 100% of program / Erase Endurance cycles: 1 Years
• Performance: (Maximum Read/Write)*
-512GB:  540/520 MB/s
-1TB: 540/510 MB/s
-2TB: 540/510 MB/s
(Test Platform: Average Value is based on Serial ATA 6.0Gb/s interface.)
• IOPS:*
-512GB: 49,000/82,000
-1TB: 51,000/85,000
-2TB: 50,000/85,000
• TBW:
-512GB: 728TB
-1TB: 1456TB
-2TB: 2912TB
• Voltage: DC +5.0V ± 5%
• Temperature: -20°C to +75°C (Operating), -55°C to +95°C (Non-Operating)
• Humidity: 10% to 95% RH, non-condensing
• Vibration**: 20G (Peak-to-Peak), 80~2000 Hz
• Shock***: 1500G, 0.5ms
• Operating System: Windows XP/7/8/10, or Windows Embedded Systems, DOS, Linux
• Certification: CE (EN55032 & EN55035),  FCC Part 15 subpart B,  RoHS 2.0 (2011/65/EU & 2015/863/EU)

*The value is various bases on the capacity and the test platform.
**Duration: 30 min x 3 axis
***1500G, 0.5msec, half-sine wave, 3times in each direction, total=18times (6 directions)
*****The value is based on normal program/erase endurance at room temperature. High environmental temperature may shorten the retention period.